PRINCE TEMBO

My duties and responsibilities include but not limited to;

-Designing and installation of electrical equipment,facilities and systems for all Toll Stations in Zambia and installation of Tolling systems

-Simulate overvoltage protection studies covering both lightening and switching surges

-Design and installation the backup solar system at all Toll Stations in Zambia

-Calculations of critical parameters for the generators,transformers,circuit breakers and other auxiliary equipment

-Installation of Air conditioner and other administrative duties.

Am also exposed to GRADERS.

-Caterpillar 16H -Komatsu 16M

• Tested wiring and other system parts for electrical flow and function.
• Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
• Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
• Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
• Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
• Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
• Inspected equipment for defects and safety hazards and completed necessary repairs.
• Tested, troubleshot, and calibrated equipment in shop and field.
• Diagnosed problems with electrical systems and rewired components to restore safe flow of electricity.
• Disassembled broken, defective, and worn out equipment to aid with repairs.
• Maintained tools and equipment in good working condition.
• Troubleshot various types of equipment during installation and processes.
• Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.

Watsons Zambia Limited

During the contract at LUMWANA MINE I was exposed to machines such as:

EXCAVATORS

-Hitachi Ex5500-5 &5500-6

-Hitachi Ex 2500-5 & 2500-6

-Liebherr R984C

-Liebherr 9250C

Caterpillar 320D

DOZERS

-Caterpillar D10T/D9T

-Komatsu D155AX

DRILL

-Atlas Copco DML LP1200/1

-Atlas Copco DM30

-Atlas Copco DML30

-Installation, maintenance and repairing of Tolling equipments

-Liaise and coordinate with personnel engaged in problem solving, monitoring and installing Road Toll Equipment.

-Read technical manuals, confer with Director Project and Technology Advisory, client and End user and Road Toll Equipment diagnostics to investigate and resolve problems and provide technical assistance and support.

-Plan and coordinate all activities of the Road Toll Zambia project in liaison with the Director Project and Technology Advisory.

• Monitored systems in operation and quickly troubleshot errors.
• Translated complex technical issues into digestible language for non-technical users.
• Assisted with updating technical support best practices for use by team.
• Explained security measures in simple terminology to help users understand malware and phishing threats.
• Identified potential sales and cross-selling opportunities and informed supervisor.
• Broke down and evaluated user problems, using test scripts, personal expertise, and probing questions.
• Tested new software and hardware prior to deployment.
• Maintained servers and systems to keep networks fully operational during peak periods.
• Assisted in development of system security protocols.

Installation, Maintenance and repairing of U.P.S System, CCTV and Road Toll Equipment.

-Maintenance and repairing of air conditioners.

-Oversee the daily performance of Road Toll Equipment, setting up and maintenance of the loop for Road Toll Equipment.

-Execution of functions in line with company strategy and goals to deliver superior service and sales.

-Other duties included supervisory collection of revenue from motorist at Kenneth Kaunda international airport and make sure that all daily sales are deposited with the authorized persons.

• Supervised more than 15 employees and monitored work performance.
• Maintained compliance with all safety requirements.
• Wrote and submitted reports covering different operational areas.
• Updated and published standard operating procedures (SOPs) using stakeholder, customer and employee input and feedback resulting in clearer and more useful instruction for users.
• Managed implementation of new technological improvements resulting in increased efficiency.
• Analyzed project-related information and made recommendations based on discoveries.
• Collaborated with IT department staff to enhance network-based technologies.
• Oversaw scheduling and use of facilities used by engineers and producers to complete technical assignments.

Maintained and repaired 11KV Transformers, 1500 KVA Generators and Baggage Handling System that operates on 380V-415V.

-Maintained and repaired Air fields lights (Run way lights) rated 5KV and Regulators.

-Maintained and Repaired Escalators, Eleventors and Conveyer belts that operates on 380V-450V.

-Maintained and repaired submersible Bore Holes pumps, Air conditions and Industrial coolers rated 380V.

• Installed and wired electrical transformers, service panels, and circuit breakers.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Performed routine and complex maintenance and repairs on various electrical equipment.
• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
• Stored and maintained power tools and equipment for each job.
• Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Troubleshot and repaired malfunctioning systems and components.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
• Managed business report generation, recordkeeping and supply ordering.